- 24 -
For best deep down cleaning, use the “XLO” setting. However, you may need to raise the
height to make some jobs easier, (such as throw rugs and some deep pile carpets) and to
prevent the vacuum cleaner from shutting off. Suggested settings are: “XLO” - most car-
pets and bare floors. “LO” - low to medium pile. “MED” - medium to deep pile. “HI” - shag;
deep pile; scatter rugs.
➢ Lower wand from upright position by
pressing on the handle release pedal.
➢ Select a pile height setting by pressing
the small pedal on the rear. The pile
height setting is shown in the window.
➢ Return wands to upright position for
storage.
Handle Adjustments
Suggested Pile Height Settings