Using Tools
ATTACHMENTS ON HANDLE
➢ If the POWER NOZZLE is attached,
turn vacuum cleaner off before
removing handle from wands.
➢ Press lock button, then pull to
remove handle from wand.
➢ Slide attachments firmly on handle
as needed (See page 30).
ATTACHMENTS ON WANDS
➢ If the POWER NOZZLE is attached,
turn vacuum cleaner off before
removing plug from wands.
➢ To remove wands from POWER
NOZZLE, lock wands in upright
position.
➢
Press wand quick release pedal with
foot and pull the wands straight up out
of POWER NOZZLE.
➢
Put attachments on wands as needed
(See page 30).
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON.
This could cause sparking and damage
the electrical contacts.
- 26 -