Panasonic MC-UL710 - The Alternative Nozzles

How to use the alternative
nozzles
When using the handle(quick draw handle),
please place the nozzle as shown.
1) Before pressing the handle release
button and pull out the handle, you have
to take off the mains lead from the cord
clip.
2) Attach the alternative nozzles to the
crevice part in accordance with your
needs.
・ Crevice part is already fixed in wand:
Pull the crevice part until it clicks when
using it in extended condition.
Shorten it to the original position while
pushing the button.
・ Dusting brush
・ Upholstery nozzle(MC-UL712only)
・ Mattress nozzle(MC-UL712only)
・ Crevice part: This nozzle is already
attached with the wand.
Storing
Perform the following before storing.
Turn off the appliance, and then
1
remove the plug from the socket
outlet.
Turn the upper cord storage hook
2
in the upright position and wind the
mains lead around the upper and
lower cord storage hooks.
For the proper arrangement of
the mains lead while storing the
appliance, it is advisable to use the
mains lead hook as shown.
Mattress nozzle
Upholstery nozzle
Dusting brush
Crevice part
Plug
Mains lead
Mains lead hook
Upper cord
storage hook
Lower cord
storage hook
Button
Pull
Handle
(Quick draw handle)
7
UL710.indd7UL710.indd7 2012/02/239:21:192012/02/239:21:19