Panasonic MCO-170AICUVH Series - Removing Inner Attachments

22
BEFORE COMMENCING OPERATION
Removing inner attachments
CAUTION
Wear rubber gloves when performing maintenance on the chamber. Failure to wear gloves may result
in cuts or abrasions from sharp edges or corners.
Always replace the inner attachments removed for the cleaning to keep the intended performance.
Be careful not to damage the UV lamp in the duct (MCO-170AICUVH/170AICUV or when an optional UV
system set MCO-170UVS is installed).
1. Turn OFF the power to the incubator.
2. Open the outer and inner doors and pull out all the
trays (Fig. 1).
3. Pull out the humidifying pan (Fig. 2).
4. Pull out the humidifying pan cover (Fig. 3).
5. Pull out the fan cover (Fig. 4).
Humidifying pan
Humidifying pan cover
Fan cover
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Tray