39
●At the alarm state
・ While the incubator’s alarm is being activated
and the buzzer is being sounding, the buzzer is
silenced by pressing Buzzer key. For the behavior
at the time of pressing Buzzer key and the
re-activation of alarm, under each setting condition,
refer to Table 5-7 on page 79.
Resolve the cause of the alarm in reference to
page 78-80 because the alarm itself is not
deactivated by pressing Buzzer key except for
some alarms.
Note: The buzzer for the high limit temperature
alarm can’t be silenced.
To Next Page
Loading...
