45
5. On the Export screen, select the time period you
want to export.
・To export the saved operation log data over the
entire period, press All radio button.
・To export the operation log data of a specified
date, press 1 Day radio button and input the date
(year / month / day) of the operation log data you
want to export
Note: The error of about 1 minute may be observed
during a month. Refer to page 52 for the procedure
of setting time.
6. On the Export screen, select the type of
operation log data you want to export.
・To export all types of operation log data, press All
Ch key.
・To export only operation log data you want to
export, select operation log data you want to export,
and then press Selected Ch key.
・Actual Temp.: Chamber temperature log data
・Actual CO2 Level: CO
2
density log data
・Door Opening: Open/close state of outer door log
data
Note: When no USB memory is inserted into the
USB port, Notice dialog box is displayed. Press OK
key, and then insert a USB memory into the USB
port.
To Next Page
Loading...
