Panasonic MCO-170AICUVH Series - UV LAMP PARAMETERS; Using UV Lamp

55
Setting DAQ
It is necessary to set several parameters when using our optional software product Data acquisition
system (DAQ) MTR-5000.
1. Press Menu key to lead the Menu screen.
2. Press Tools #2 key to lead the Tools #2 screen.
3. Press DAQ Setting key to lead the DAQ Setting
screen.
4. On the DAQ Setting screen, each setting of DAQ
is available. Refer to the Procedure Setting Manual
Data Acquisition System MTR-5000 for details of
settings. Press Apply key to save the input value
and setup. The display returns to the Tools #2
screen.
5. Press Top key to return to the Top screen.