Panasonic MDF-U700VX-PB - Log Interval Adjustment

30
ENTER
VARIOUS SETTING (MENU/Tools)
Set of log interval (Tools/Log Interval)
This product can change the set point of the log interval (Log Interval) until 2 minute - 30 minutes.
(Factory setting is 15 minutes.) It can be recorded for about 5 weeks if it is a log interval for 15 minutes.
Table 12 The log interval set-up steps of the log (When a log interval is changed from 15
minutes to 10 minutes.)
Description of operation Key operated Indication after operation
1 -----
Top screen is displayed
2 Press the MENU button. MENU
The menu window is indicated. And the
“set” is highlighted.
3
Press the shift key, highlight the
“Tools” menu window, and press the
ENTER key.
Select Tools window is indicated.
4
Press the shift key, highlight the
Date Time by pressing ENTER keys.
The Date is highlighted
5
Select Log Interval by pressing
MENU button. Then, pressing
ENTER key
Log Interval setting window is indicated.
6
Figure input key is pressed in order
of 1, 0.
Log Interval is changed at 15 to 10.
7 Press the ENTER key. ENTER
The menu window is indicated. And the
“OK” is highlighted.
8 Press the MENU button. MENU
Log Interval is memorized, and the Select
Tools window is indicated.
9
The shift key is pressed, and made
to highlight Cancel of the menu
window, and press the ENTER
key.
ENTER
Top screen is displayed
ENTER
1
0
MENU
ENTER