Panasonic MDF-U700VX-PB - TECHNICAL SPECIFICATIONS; Product and Dimension Details; Capacity and Material Specifications; Component and System Details

53
SPECIFICATIONS
Product name Ultra-Low Temperature Freezer
MDF-U700VX
Ultra-Low Temperature Freezer
MDF-U700VXC
External dimensions W1010 mm x D870 mm x H2010 mm
Internal dimensions W870 mm x D600 mm x H1400 mm
Effective capacity 728 L
Exterior Painted steel
Interior Painted steel
Outer door Painted steel
Inner door ABS resin panel with stainless frame, 2 doors
Shelf Stainless steel, 3 shelves (adjustable)
Inner dimension; W848 mm x D533 mm, Load; 50
kg /shelf
Access port 17 mm diameter, 3 locations (back, 2 bottoms)
Insulation Vacuum insulation panel + Rigid polyurethane foamed-in place
Compressor A Compressor; Hermetic type, Output; 1100 W
B Compressor; Hermetic type, Output; 1100 W
Evaporator Tube on sheet type
Condenser Finless tube type
Refrigerant HFC mixed refrigerant
Temperature controller Microcomputer control system
Temperature display Digital display
Thermal sensor Platinum resistance (Pt 1000 Ω )
Alarm High temp. alarm, Low temp. alarm, Power failure alarm,
Door alarm, Sensor abnormality, Fan motor abnormality,
Compressor temp. abnormality, Cooling circuit abnormality
Remote alarm contact Allowable contact capacity: DC 30 V, 2 A
Battery Nickel-metal-hydride battery, DC 6 V, 1100 mAh, Auto-recharge (5HR-AAC)
Weight
375
kg 383 kg
Voltage booster None Built-in
Optional component
Temperature recorder (MTR-G85C)*,
Temperature recorder + Recorder fixing (MTR-85H + MDF-S3085),
Small inner door (MDF-7ID),
Inventory rack (IR-220U, IR-224U),
Interface board (MTR-480, MTR-L03),
Data acquisition system (MTR-5000),
Backup cooling kit (CVK-UB2, CVK-UB2I): LCO
2
Note :
• Design or specifications will be subject to change without notice.
• Refer to the updated catalog when ordering an optional component.
*: Power source of the temperature recorder shall be 220 V.
• When a data transmitting function to the personal computer is done, an interface board MTR-480
(option) and communication cable of 9 pin Dsub cross type for RS232C are necessary.
• When a data transmitting function to the personal computer is done, an interface board MTR-L03
(option) and the cross type cable of less than 100 m length having a pin plug for cable are necessary.