Panasonic MicroClear4000 - Maintenance

EN31EN30
English
Usingpuriedwater
3
Whennished,turnoffthewater
faucet.
Usingunpuriedtapwater
Always use water with a temperature under 80 °C.
(If not observed, may result in malfunctioning of the water purier.)
1
Set the selector lever to
“ ” or “ ”.
< :Unpuried>
<
:Shower>
Selector lever
2
Turn on the water faucet to
letthewaterow.
3
Whennished,turnoffthe
water faucet.
Operation (continued) Maintenance
Note ⿟Do not use detergents, cleansers, paint thinners, benzene, alcohol, kerosene, etc.
If used by accident, wipe the product with a damp cloth to remove the detergent, etc. on
the surface.
(The detergent may get mixed in the water, cause the resin to crack or lead to
discoloration/deformation.)
⿟Do not use a metal brush, etc. (Doing so may cause scratches.)
⿟Do not use a tool to tighten up the nut.
(Doing so may damage the nut.)
Main unit
Moisten and wring a soft cloth,
and clean the product with it.
As often as once
a week
TK-CJ600_CJ300_EXZ.indb 30-31 2022/01/05 15:32:28