Safety Lock
Circuit Breaker Protection
When Circuit Breaker automatically stops Motor due to overload,
press the “OFF” Button.
."OFF"
"OFF"
1
Remove the Jar and reduce its contents to half.
2
After 2 or 3 minutes, tilt the Motor Housing and push the Circuit Breaker
Button at the bottom surface. The appliance is now ready for resume.
32
32
3
12
The Safety Lock has been designed to prevent the appliance from switching on when the Jar is not properly in place. Do not push the
Safety Lock with any implement, stick etc.
Keep clean to avoid foreign particle deposits on the Safety Lock.
Motor Housing
Safety Lock
Circuit Breaker Button
To Next Page
Loading...
