How to Assemble / Disassemble
13
Blade / Whipping Plate
(Jar, Mill Jar, Chutney Jar, Multi Jar)
Put the Blade or the Whipping
Plate inside the Jar.
.
Tighten the Blade knob (black) with the
Spatula (anti-clockwise direction).
(Chutney Jar / Multi Jar)
The Chutney Blade is xed
permanently. Do not attempt to
remove the Blade.
Hold the Jar coupler at the bottom.
To disassemble, reverse the
assembly instructions.
Attach the Gasket to the Lid with grooved
slide down.
Set the hook on and make sure the Lid is
locked.
In case the Lid is forced to open without
pushing the Button, the Hook may break.
Assemble
Top
Lift up the Lid.
Bottom
Disassemble
2
1
3
2
Push the Button.
1
Lid
Hook
To Next Page
Loading...
