Name: Panasonic MX-V310
Brand: Panasonic
Rating: 4 (1 reviews)

Questions and Answers:

Christian PhillipsAug 5, 2025

What to do if my Panasonic MX-V310 Blender stops during blending?

A
Aaron FloresAug 5, 2025
If your Panasonic Blender stops during blending, it could be due to several reasons. The circuit breaker might be activated because you're using too many ingredients or hard ingredients. Reduce the ingredients to less than half of the working capacity and/or remove any hard ingredients, then try again. If it still doesn't start, reset the circuit breaker by pressing the button again. Avoid repeatedly resetting the circuit breaker. Another reason could be that you are using prohibited ingredients, in which case you should remove them. Also, the maximum operating time might be exceeded; turn off the power and check the recommended operating time.

landersonAug 10, 2025

What to do if my Panasonic MX-V310 won't start even though the power is on?

J
Jennifer BurnettAug 10, 2025
If your Panasonic Blender isn't starting even with the power on, ensure that the Blender Jug or the Mill Container is correctly placed. Also, check that you're not overloading it with ingredients or using prohibited ingredients; do not exceed the working capacity and only use permitted ingredients. Finally, the Safety Lever might be stuck. Disassemble the Blender Jug Base and follow the assembly sequence.