36
11.4. NTC
Component which sends signals to PCB about the water tem-
perature inside the tub.
The Resistance (Ohm) value of the NTC decreases as the tem-
perature increases.
11.4.1. Technical Features
NTC Tempure - Resistance Values
11.4.2. Checking of Component
Check the resistance value on the component with multimeter
as shown in below pictures.
Checking the component
11.4.3. Component Controlling By Con-
nection Measurement
You can determine the ohm value by measuring from the black
cable at 3th and black cable at 11th position in the small socket
(refer to 13 Wiring Connection Diagram) as shown in belows
figures.
NTC resistance value varies depending on temperature.
Tem (°C) R min (kΩ) R max (kΩ)
-10 54,9 62,6
-5 43,0 48,6
0 33,9 38,1
5 27,0 30,1
10 21,6 23,9
15 17,4 19,1
20 14,1 15,4
25 11,5 12,5
30 9,4 10,2
35 7,8 8,3
40 6,4 6,9
45 5,4 5,7
50 4,5 4,7
55 3,8 3,9
60 3,2 3,3
65 2,7 2,8
70 2,3 2,4
75 1,9 2,0
80 1,7 1,8
85 1,4 1,5
90 1,2 1,3
95 1,1 1,1
100 0,9 1,0
To Next Page
Loading...
