34
11.2. Heater
Heating element (Resistance) is a component which is
designed to regulate temperature of water inside the drum.
It has three connections: Phase, neutral and ground con-
nections.
Technical features
Heater type Tubular heating element with NTC-sensor
Nominal voltage 230 V
Nominal power 2000 W (±5%)
Resistance 26.4 ±5%
Thermal fuse 2 sided
Testing component
Check the resistance value on the component with multimeter as shown below.
Resistance value should be between 26.4 ±5%
You can determine the ohm value of resistance by measuring from the socket with grey and brown cables
(referring to X6 on the electronic card).
Component test
To Next Page
Loading...
