36
11.4. Valve
Valve is an electrical and mechanical component which is
designed to take water from the network system into the
washining machine. It is operated by PCB card.
Technical features
Nominal voltage 220-240 V
Nominal power 8 VA
Frequency 50-60 Hz
Rated flow 7 L/min (±15 %)
Operating water pressure 0.02 - 1 Mpa
Testing component
Check the resistance value on the component with multimeter as shown below. Valve water flow rate should be between
6 - 8 L/min. Each valve coil resistance values should be between 3.3 - 4.2 k
You can determine the resistance value of the main wash valve by measuring from the large socket which has one blue, one
black and two white cables as shown in the figure below (refers X5 on the wiring diagram). Each valve coil resistance values
should be between 3.3 - 4.2 kohm.
Component test
To Next Page
Loading...
