Panasonic NA-128VG6 - Maintenance Procedures; Filter and Hose Care

27
Optional FunctionsMaintenance
Maintenance
:DWHUVXSSO\¿OWHU
&OHDQWKH¿OWHULIZDWHULVQRWVXSSOLHG
properly.
:DWHUVXSSO\¿OWHU
1 Turn off the tap.
2 Turn on the power and start the
“Cotton” programme without any
laundry or detergent inside the
drum.
3 After 1 minute, turn off the power.
Water has drained out of the water
supply hose.
4 Remove the water supply hose and
FOHDQWKHZDWHUVXSSO\¿OWHU
Water supply
¿OWHU
Brush etc.
If the water supply hose is frozen
1 Wrap warm towels around the joints
of the water supply hose.
Joints
Water
supply hose
2 Put 2 to 3 litres of hot water (about
50 °C) into the drum.
3 Wait for about 10 minutes, select
and run the spin process in “Mode”
function (P. 24).
NA-128VG6_EN(HK).indd 27 2017-10-12 17:29:54