40
Checking after Installation (continued)
Test run
435
1
Turn on the tap.
2
Close the door without any
laundry in the drum.
3
Switch on the appliance.
4
Select the “Rapid 15”
programme.
5
Start operation.
Water leaks
zCheck the appliance and hose
joints for leaks. (P. 37)
Abnormal noise
zMake sure the appliance is level.
(P. 36)
Error display
Unable to drain (P. 33)
Unable to supply water
(P. 33)
zAfter resolving an error, open
and close the door and press
“Start/Pause” to resume the test.
NA-128VG6_EN(HK).indd 40 2017-10-12 17:30:03
To Next Page
Loading...
