Panasonic NA-F150A3

WASHING / MIDDLE EAST
Preparation:
●
Check if the washing machine is properly installed.
●
Turn on the water faucet.
1
After loading laundry
Turn the power on.
●
The Normal program is selected when the
power is turned on.
2
Select a program.
■
Timer preset
3
Start.
The pulsator moves without
water and measures the amount
of laundry (approx. 5 seconds).
Water level indication
(approx. 5 seconds)
Remaining time indication
●
To check the water level
 Press “Water Level”.
4
According to the water level indication
Put in detergent.
●
Approx. 20 seconds after the water level is
displayed, water supply begins.
5
Close the lid.
Operation ends with beeps.
Set how many hours later to finish
operation.
●
2 minutes after start-up, all indications except
turn off.
●
To confirm after the timer has been set, press
.
●
To cancel or change, press
.
●
The hours that can be set differ depending on
the program.
When the Fragrance program is selected
The buzzer sounds before the final rinse and
operation is paused. Put the desired amount
of softener which has been diluted with water
directly into the tub.
5 beeps
●
The Fragrance program cannot be selected
when Child Lock is set.
●
Operation will resume if the lid is left closed for
more than 1 hour.
■
After pressing “Start”
●
You can change the water level until the end of
the wash process.
●
You can change each of the “Wash”, “Rinse”
and “Spin” operation contents until the end of
the wash process. Press “Pause” beforehand.
●
You cannot change the program.
2
3
Timer preset
1
- 10 -