4.Operation Instruction
4.1 Indicators and buttons
Attention : If you need to change the setting after the cycles has already started, turn the power off and then back on.
Indicates the appropriate waterlevel
according to the laundry amount.
Water Level / Volume Indicator
Indicates the cycle in
progress by flashing.
The power automatically turns off when a
course is finished, or if washing is not
begun within 10 min. turning the power on.
According to laundry volume
and stain, you can select a
suitable course by yourself.
You can choose the
finishing time either
after 2 to 24 hourse.
The lamp will light
when Child lock
mode is set.
Setting can be changed
according to your
preference.
Custom cycles
can be chosen.
Use to select wash water temperature
Press button to select
01(hot),02(warm),03(cold).
Push this botton to start.
Push this botton to stop
during the cycle.
Drying the tub
to
prevent mould
growth.
It is suitable for washing
stained laundry and soiled
collar and wrist portions of
dress shirts .
Indicates which
Course has been
selected.
To Next Page
Loading...
