Panasonic NE-1878BPQ - H.V.inverter

33
7.5. H.V.inverter
1. Remove the cabinet and back panel.
( Refer to "7.1.Cabinet, back panel”)
7.5.1. H.V.inverter (upper)
1. Remove the inverter lead-wire and high-voltage lead-wire
from each hook and holder.
2. Remove the high-voltage lead-wire from the magnetron
(upper)
High-voltage lead-wire (2 places before and behind the
white connector)
3. Remove inverter block (upper). (Black arrow: 5 screws)
4. Remove the inverter lead-wire and high-voltage lead-wire
from each hook and holder.
5. Remove the cover (White arrow: 1 hook)
6. Remove connectors (CN701, CN702, CN703).
7. Remove the H.V.inverter. (Black arrow: 2 screws, white
arrow: 3 hooks)
7.5.2. H.V.inverter (lower)
1. Remove the inverter lead-wire and high-voltage lead-wire
from each hook and holder.
2. Remove the high-voltage lead-wire from the magnetron
(lower).
(High-voltage lead-wire: 2 places before and behind the
blue connector)
3. Remove inverter block (lower). (Black arrow: 5 screws)