Example: To display the filter cleaning alarm counter
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Open the door and leave it open.
The oven lamp will turn on, and “0” will appear.
2
While pressing Start pad, press Number/Memory pad “5”.
The cumulative total cooking time starts over and displayed after it is
cleared.
e.g.
• 3 seconds later, “0” will appear.
J. OVEN LAMP
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (See pages 13-14)
Oven Lamp settings when the door is open. X
Example: To turn Oven Lamp settings OFF
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Open the door and leave it open.
The oven lamp will turn on, and “0” will appear.
2
While pressing Start pad, press Number/Memory pad “9”.
“PROG” will start to blink.
The previously set Oven Lamp settings are displayed.
3
Press Start pad.
“on” “oFF” “on” is repeated each time the pad is pressed.
4
Press Prog pad.
“PROG” will stop blinking, and the Oven Lamp settings will appear for
3 seconds.
Then “0” will appear.
To proceed to Step 5, press Start pad before “0” is displayed
after Step 4.
How to Operate
To Next Page
Loading...
