To Use Timer Function
DIJ*4|NSION •
@Z 3Z
I@
@7Zl,
CED
This feature allows you to program a Standing Time after
cooking _s completed and to program the oven as a
minute timer and/or to program delay start.
To Use as a Kitchen Timer
Press Timer
2 Set Desired .
Amount of Time
using number pads
(up to 99 mmutes and 99 seconds)
3 Press
,m-Time will count down without oven
operating.
To Set Stand Time
Set Desired
Cooking
Program
B
e g. H_gh 10 mm Press.
(See page 12)
To Set Delay Start
Set desired
amount of stand
time.
Press
Cooking wdl start
After cooking, stand
ttme will count down
w_thout oven operating
_ _ SetDesired
-- _ Cooking
Program
Press Set desired amount e g. High 10 mln Press
of delayed time. (See page 12) After completed
delayed t=me,
cooking will start.
NOTE:
1. When the first/second stage has fintshed, a two beep s_gnal =sheard After all the stages have been
completed, the oven wdl beep five ttmes.
2 If oven door is opened during the Stand Time or Kitchen Ttmer, the time =nthe Menu Action Screen
Display will continue to count down
3. Delay Start cannot be programmed before any Auto Control Function
Thts is to prevent the starting temperature of the food from nsmg before defrosting or cooking begins
4. T_mer can be set up to 99 mmutes and 99 seconds
22
To Next Page
Loading...
