14 EN
NN-GD34HW
Control Panel
Note
When in stand-by mode the
brightness of the display will be
reduced� The oven will enter
stand-by mode, when rst plugged
in and immediately after the last
operation has completed�
If an operation is set and Start
button is not pressed, after 6
minutes the oven will automatically
cancel the operation� The display
will revert back to clock mode�
Beep sound
When a button is pressed correctly
a beep will be heard� If a button
is pressed and no beep is heard,
the unit has not or cannot accept
the instruction� At the end of any
complete program, the oven will
beep 5 times�
1. Display window
2. Micro Power button (page 16)
3. Grill button (page 21)
4. Combi button (page 22)
5. Turbo defrost button (page 28-29)
6. Auto cook button (page 25, 27)
7. Auto Combi button (page 25-26)
8. Dial (page 20)
Enter time or weight of food by turning the
dial� Use the dial for the Add Time function�
9. Quick 30 button (page 19)
10. Timer/Clock button (page 15, 23)
11. Stop/Cancel button:
Before cooking:
One press clears your instuctions
During cooking:
One press temporarily stops the cooking
program� Another press cancels all your
instructions and the time of the day will
appear in the display�
12. Start button
Press to start operating the oven� If during
cooking the door is opened or Stop/Cancel is
pressed once, Start has to be pressed again
to continue cooking�
This oven is equipped with an energy saving
function.
2
3
10
11
4
7
6
5
9
12
1
8
To Next Page
Loading...
