- Eng-21 -
English
One Push Setting
One push setting can simplify operation. You can set desired function as one push setting that can use easily in
each time.
To Save:
➊
“ ” will flash in the display window
after finishing. It means you can save
program as one push setting.
➋
“ ” will stop flash in the
display window when press
button 2 seconds. Program has
saved successfully.
To set:
➊
Press Start/Set button and saved
program appears in the display
window.
Example: Saved
“Steam-High” for 3
minutes
➋
Press Start button to cooking.
To cancel:
➊
Press Start/Set button and saved
program appears in the display
window.
Example: Cancel
saved “Steam-High”
for 3 minutes
➋
Press the button 2 seconds and
cancel one push setting.
Notes:
1. “
” will flash in the display window after finishing. Press Stop/Reset button if you do not want to
save program as one push setting.
2. If one push setting is saved, “
” will flash in the display window.
3. Only one program can be set to one push setting. Previous one push program will be covered when a
new program is saved.
4. One push program will remain if powered off.
5. One push setting is available for all functions. (only except Steam Shot)
F0003CF00CP_09_EN_20210218.indd 21 2021/2/27 10:33:26
To Next Page
Loading...
