Handling the Lens
Cap
Before you start recording. rernove the Lens Cap
1
You can hook the removed Lens Cap onto
the Grip Belt.
When not actually recording. always attach the Lens
Cap to the Lens to protect it.
Note:
Do not leave the Lens exposed to direct sunlight, as $t
could bundle the light beams and seriously heat-damage
the CCD-Sensor.
Adjusting the Grip Belt
You
can
adjust the Grip Belt to the size of your hand
2
Open the Grip Belt Cover and adjust the
length of the Grip Belt.
Attaching the Shoulder Strap
Before you go recording outside. we recornmend that
you
anach the Shoulder Strap to prevent
the
Movie Camera
from dropping accidentally.
3
Pull the end of the Shoulder Strap through
the Shoulder
Strap Holder on the Movie
Camera.
4
Fold the end of the Shoulder Strap back,
pull
it
first through the loop and then the
Shoulder
Strap Length Adjuster.
Pull it out rnore :han
2
cm
O
from the Shoulder
Strap Length Adjuster so that t cannci slp off
To Next Page
Loading...
