Panasonic NV-DS11EN - Wipe Function and MIX Function

1 E[blBl, M%%E?o
2 ?T!Z#TBRBSSlfoRGG62E+mEori
E $Z [STORE] (HG) B
3 G?EfJS@W%UE%B~BZ~IEE T E
[OFFION] B o
-*.sa;-: . *%-.RA++ zzfi-+',.
.z;*-. .L/(i$g%~:c>-<%~..
Playing Back with Special Effecfs
(Playback Digital Eiiects) (Continued)
Wipe Function and Mix Function
Afier having selected [WIPE] or [MIX] in Step 3 on
page
92:
1
Press the [b] Button to start playback.
2 Press the [STORE] Button at the moment
that you want to store
as still image in
memorv.
The [m] or [m] Indication appears and the
picture is stored in rnernory
3 Press the [OFFION] Button at the scene at
which you want to use a Wipe or
Mix effect.
The scenes change with a Wipe or Mix effect.
*Operating the Wipe Function and the Mix Function
during playback is only possible with the Rernote
Controller.
*It is not possible to add a Wipe or Mix effect during
playback of an unrecorded part on the tape.
*If you press the [OFFION] Button while the Wipe or Mix
is being
performed, the effect is paused at that point. If
you press the [OFFION] Button
again, the effect
resurnes.