Searching
for
the Beginning
of
Recorded
Scenes (Scene Index
Search)
*Press the [VCRICAMERA] Bunon on the Movie Camera
so that the [VCR] Lamp lights.
*Set [SEARCH] on the [OTHER FUNCTIONS] Sub-
Menu to [SCENE].
Scene Index
Search
in
Forward Direction
Press the Index Button
[tcl]
O
on the Remote
Controller.
Scene Index
Search in Reverse Direction
Press the Index
Bunon [H41
0
on the Remote
Controller.
*When you briefly press the corresponding button once,
the
($11 Indication appears and the search for the next
scene
marked with an index signal starts. After the
Scene Index
Search has started. every time you press
the button, the indication
changes successively from
[S21 to [S9], and the beginning of the scene
corresponding to the selected number is located
0.
After reaching the desired scene, playback staris
autornatically. (At a time, Scene Index Search in
forward or
reverse direction is possible up to the ninth
scene
marked with index signal from the present tape
position.)
*If the interval between two scene index signals is less
than
1
minute, the Scene Index Search may not work
correctly.
*The Scene Index Search rnay not work correctiy for
scenes recorded near the beginning of the tape.
*If
you keep the [IM] or [rtl] Button pressed for more
than
2
seconds. the lntro Search Function is activated
and it plays back the beginning of all scenes
marked
with an index signal on !he cassette one after another
for a few
seconds each.
(To cancel the
Intro Search Function. press the Play
Button [b]
O
or the Stop Button
[H]
0.)
To Next Page
Loading...
