Charging the Built-in Lithiurn Battery
The built-in battery rnaintains the operation of the clock.
When the
[a]
Indication appears. the built-in lithiurn
battery is discharged. Charge the discharged battery in
the following way and
after charging is finished, set the
date and time.
1
Connect the AC Adaptor to the Movie
Camera and to an AC mains socket.
(+
16)
2
Leave the Movie Camera turned off.
3
Leave the Movie Camera in this condition
for approximately
4
hours.
After charging for
4
hours, the built-in lithium banery
can power the clock for approximately
3
months.
To Next Page
Loading...
