Panasonic NV-DS28A - Zoom Function; Digital; Fade In;Out Functions

Hi-
SEARCH » FADE STILL BLC
~1,3
Digital
Zoom Function
This function is useful when
you want to record close-up shots of subjects
located beyond
a
normal zoom
range of 1
x
to
15x
magnification. With the
Digital
Zoom
Function,
you can select
a
magnification of
30x
or even
to
600X.
1 Set [CAMERA FUNCTIONS]
»
[CAMERA SETUP]
»
[D.ZOOM] » [30X]
or
[600X].
•30x:
Digital zooming
to
30
x
•
600x;
Digital
zooming
to
600X
2 To zoom in or
out, push the [W/T] Zoom Lever towards [W] or
towards [T].
To
Stop the Digital
Zoom Function
Set [D.ZOOM] on the
[CAMERA SETUP]
Sub-Menu to
[OFF].
•As
the magnification of
digital zoom increases, the quality of image may
deteriorate.
•White balance cannot
be set
in
the digital
zoom
range.
Ilmage
Stabilizer
Function
If the Movie Camera might
be shaken
while recording, the camera shake in
the
image can be corrected.
•
If the Movie
Camera shakes
too much, this function may not
be
able to
stabilize images.
1 Set [CAMERA FUNCTIONS]
»
[CAMERA SETUP]
»
[SIS]
»
[ON].
•
The
[ ®
]
Indication
Q
appears.
To Cancel Image
Stabilizer
Set [SIS] on the [CAMERA SETUP]
Sub-Menu to [OFF].
•
For other
notes concerning this Item,
see page40.
Fade In/Out
Functions
Fade In
Q
Fade In
brings out images and
sounds gradually from a black screen
at
the
beginning
of a scene.
1 Keep pressing
the
[FADE]
Button during the Recording
Pause
Mode.
•The image fades
out gradually.
2 When the
image is completely gone,
press
the Recording
Start/Stop
Button to start recording.
3
Release
the [FADE] Button about 3
seconds
after starting
recording.
•The image reappears gradually.
Fade
Out
Q
Fade
Out
causes
images and sounds
to
disappear
gradually, leaving a black
screen
at the end of a scene.
1 Keep pressing the
[FADE] Button
while recording.
•
The image fades out gradually.
2
When
the
image is
completely gone, press the Recording
Start/Stop
Button
to stop recording.
3 Release
the [FADE]
Button.
•The
still picture cant fade
in
or fade
out.
20