EasyManua.ls Logo

Panasonic NV-DS28A - Index Search Functions

Panasonic NV-DS28A
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index
Search Functions
To facilitate searching of desired scene, this Movie
Camera automatically
records index signals during recording, as explained
in the following.
Photoshot Index Signal
These signals are automatically recorded whenever
still pictures are taken
in
Photoshot Mode.
19)
Photoshot Index
Signals are not recorded on stiil
pictures
recorded
in Continuous
Photoshot Mode.
Scene Index Signal
Scene
Index
Signals are automatically recorded when you
start recording
after inserting
a Cassette.
If [SCENE INDEX] of (RECORDING SETUP]
Sub-Menu on the [CAMERA
FUNCTIONS] Main-Menu is
set
to [2HOUR], an
index signal is recorded
when
recording
is restarted after an elapse
of
2
hours or longer. If it is set to
[DAY], an index signal is recorded when recording is
restarted
after the date
has changed since the last recording. (While the index
signal is recorded,
the [INDEX] Indication flashes
for a
few seconds.
®)
If
the
Movie Camera
is switched from the VCR Mode to Camera Mode or if
the date and time is
set before the start of recording,
the
index
signal is
not
recorded.
Photoshot Index
Search
1 Set [VCR FUNCTIONS]
» [PLAYBACK
FUNCTIONS] »
[SEARCH]
»
[PHOTO].
2 Press the
[
W
]
Button
Q
or
[
]
Button
©
on the Remote
Controller.
•With each
press
of the corresponding button, still pictures recorded in
Photoshot Mode are
searched.
Sounds are played back for approximately
4
seconds.
Scene Index Search
1
Set [VCR FUNCTIONS]
» [PLAYBACK
FUNCTIONS] »
[SEARCH]
»
[SCENE].
2 Press
the
[»\]
Button or
[
]
Button on the Remote
Controller.
•When
the corresponding button is pressed once, the
[S
1]
Indication
®
appears, and searching of the subsequent scene marked with an index
signal
starts. Each time the button Is pressed after the start of Scene
Index
Search, the Indication
changes from
[S
2]
to [S
9],
and the beginning of the
scene corresponding
to the selected number will
be
searched.
Up to 9 scene numbers can be selected.
Continuous Index
Search
If
the
[!
]
Button or the
[
W*]
Button
is
pressed
for
2
seconds or longer,
search can be
continued at several-second Intervals. (To cancel, press the
[
]
Button
O
or the
[]
Button
Q-)
For other notes
concerning this item, see
page
41
.

Related product manuals