Panasonic NV-RX1A - Recording with Automatic White Balance Adjustment; Recording with Manual White Balance

34
White Balance Sensor
Title
Recording with Automatic White
Balance Adjustment
When the [AE] Selector is set to “AUTO”, it is possible
to record pictures with natural colours under almost
any recording condition.
When the [AE] Selector is set to a position other than
“AUTO” and the “x8” Indication is displayed in the
Viewfinder, press the [W.B] Button to make the “yay”
Indication disappear.
Recording with Manual White
Balance Adjustment
If there is only one light source:
Follow the operation steps 1~4 on the right.
Note:
If there are several light sources or if the illumination is
weak:
In operation step 2, instead of attaching the Lens Cap,
point the Movie Camera at a pure white subject.
@|f you want to record under weak illumination, precise
Manual White Balance Adjustment may not be
possible. in this case, record in the “AUTO” Mode.
fem)
®
m
PROGRAMME
Procedure
7
Li
YA PROGRAMME
a AE
a
“8 PROGRAMME
AE
ed:
The “MNL” Indication
appears in the
Viewfinder.
Attach the Lens Cap and
point the Movie Camera
at subject.
or
Point the Movie Camera
at a pure white subject.