Panasonic Omnivision PV-2601 User Manual

EA
Tape
Operation
mb
Our
Vacation
|
Your VCR is equipped with several time
saving features as well as convenient
automatic functions which make tape
operation easier than ever.
Se OG
©
Auto Operation Functions
Auto Playback
When a tape is inserted, the power
comes on (Auto). If the record tab*
is removed, playback begins (Auto).
Auto Rewind
After a tape reaches its end during
playback, fast forward or manual
record, the VCR will rewind and
go into Stop mode.
Playback Auto Eject
After a tape without a record tab*
is played to its end, the VCR will
rewind and then eject the tape.
Memory Rewind Off
When the POWER button is pushed
during rewind, the VCR will turn off
after rewind is complete.
Eject Cassette
A cassette may be ejected with power
on or off.
* For record tab information, see page 5.
14
Repeat Play
You can set your VCR up to play a recording over and over.
Push MENU to
O) display the menu.
MENU
SELECT :
CHANNEL
ID 1OMA/ LANGUE: ENGL | SH
ROTATE WHEEL
AAA
TA
ee
:
PUSH
WHEEL
D
—
Rotate
and
push
the
END
:
PUSH
MENU
KEY
WHEEL
to
select
|
SET
UP
VCR.
SET
UP
VCA
:
INPUT
SELECT
E
UNER
Rotate
the
WHEEL
to
o
GL
select
“REPEAT
PLAY”,
|ser
:
push
weet
then
push
to
select
END:
PUSH
MENU
KEY
“ON”
or
“OFF.”
>
The VCR plays to the end of a tape, or until a blank portion of 30 seconds or more
is reached. (Erased portions of tape are not considered blank.) The tape is then
automatically rewound and played again and again until Repeat Play is cancelled.
All function buttons (REW, FF, etc.) are operational during Repeat Play.
2
MENU
Push MENU twice to
leave this screen.
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
A | Push ZERO/1MIN
fot
in Play mode.
* The VCR will go into FF search mode and skip over 60 seconds
of recorded time. Then, norma! playback will resume.
Zero Search
You can reset the Time Counter to zero and then return to that point.
DISPLAY Push DISPLAY to STOP
12:00AM
display the Time
- Counter overlay.
12:00AM
l ies - Push COUNTER RESET
D Reser’ to reset the Time Counter. (+=
O » This may be done at as many
places as you wish on the tape.
Push ZERO/1MIN
in Stop mode.
©) ZERO/1MIN
last point the Time Counter was set to 0:00:00.
CHO8
0:00:30
SLP
CHOS
0:00:00
SLP
* The VCR will go into FF or REW mode and stop at the

Panasonic Omnivision PV-2601 Specifications

General

Brand	Panasonic
Model	Omnivision PV-2601
Category	VCR
Language	English