Panasonic Omnivision PV-2601 - Record on a Tape (Main Operation, One Touch Record, Channel Selection, Rapid Tune)

Record On a Tape
[A
check
list
before
you
begin.
Insert
a
cassette
* VCR power comes on automatically.
Ol All connections are made.
(See pages 6-9.)
O VCR is Plugged in.
C TV is turned on and set to the VCR
channel (CH3 or CH4).
ven,
Push
VCR
CH
4A/¥
or
STOP CHo2
eA NUMBERED ihe to
i
Functi
|
¿
select
a
channel.
Multi Fi :
D
Display
Gi
©
Q-
+
«
Or,
push
CH
dh/Y
on
the
VCR.
« To record from an outside
source, push VCR CH A/¥
to select “LINE” (see page 18).
- Push SPEED to change
«eee
current
recording
speed.
a
« SP = Standard Play, LP = Long
Play, SLP = Super Long Play.
y
R/TV CHANNEL
YG Up/Down ar
E) o "Push REC/TIME
© . + Or, push PLAY and
REC/TIME on the VCR.
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off
at a preset time.
Continue
to
push
REC/TIME
to
set
ce
a)
4
TO SELECT
the recording length. Each Push will
change the stop time as shown.
* “TIMER?” lights in the Multi Function Display.
Ww
ay
2.
O
O
3
O
-r
9)
=,
Oo
5
D0—3:004-2001:30
Push STOP to
6) - stop recording.
+ Or, push STOP on the VCR.
Watching Another TV Program | Selecting Channels at the VCR Rapid Tune
1 Push VCR/TV while recording is 1 Turn TV on. Push R-TUNE to display the last
in progress to turn off the VCR => , , channel you were watching.
indicator in the Multi Function -\CR- Multi- Function
Display. —— eee Previ P
If indicator doesn't light, fevigus resent
2 Use the TV channel controls to PUEN ERC UML ILOG: enanre, -NANNE
select a program. The VCR will CHO8 CH10
continue to record your program 2 Use VCR CH A/V buttons
while you watch any channel to select channels for viewing + When selecting channels with the
you choose. or recording. VCR CH A/V buttons, channels
» Switch back and forth between the » To resume TV control channel (must OS deplayed lor Ar IPARI.
recording and viewing channel selection, push VCR/TV to turn VCR SPONA rder ror MEVEN IO:
with the VCR/TV selector. indicator off, or simply turn VCR off. recognize themasia new selection:
- Holding down the VCR CH A/¥ buttons will increase the channel search speed.
* Push PAUSE to pause a recording in progress.
* The recording time remaining appears if the DISPLAY button is pushed during OTR mode.
After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and video head.
15