With the proper audio mode setting, your VCR can:
1) record and playback an MTS stereo broadcast (main language) in stereo Hi-Fi.
2) record and playback a monaural broadcast (main language) or Secondary Audio Program (sub language)
on the Hi-Fi tracks for better quality monaural sound.
3) playback non Hi-Fi tapes in monaural.
• When recording, the selected broadcast sound is always recorded on the left and right Hi-Fi tracks as well as
the normal monaural track. This means your tapes can be played back on Hi-Fi as well as non-Hi-Fi VCRs.
1.
b
Audio Mode for Recording
,4
/ Press SAP/Hi-Fi repeatedly
(each press within 5 seconds)
to select the desired audio mode
(STEREO, SAP, or MONO).
• Please refer to the "Receivable
Broadcast Types" section on page 26.
ISTEREO
I_SAP 4
MOI0
• The arrow indicates
your selection.
2 Do a recording.
See the "Record On a Tape" section on page 17.
Audio Mode for Playback
a Playback the tape.
See the =Playback a Tape" section on page 16.
bPress SAP/HI-Fi repeatedly
(each press within 5 seconds)
to select the desired audio
mode (HIFI or NORMAL).
• Select =HIR" to listen to your stereo
recordings with stereo sound, or
"NORMAL" for rnm_ural sound.
HIFI
NORMAL
r
• The arrow indicates
your selection.
27
To Next Page
Loading...
Need help?
General