VCR Plus+ Pro rammin
Easy Taping. 1 Press PROG to display the
[_PCheck list before you begin.
El.The clockis set.
[] VCR Plus+Setupiscomplete
(see pages28-30).
"SET PROGRAM" screen.
2 Press AV to select =VCR Plus+
PROGRAM," and then press •
to display the "VCR Plus+"screen.
TIMER PROGR,tBi
VCR Plus+
ENTER PLUSCODE NUMBER
/!\
USING 0-9 KEYS
END :PROG KEY
9
9
2
6
3.
5
Multi Function Display
w i
o
Use norma! Timer Recording steps if:
• the PlusCode for a program is not listed.
• you anticipatethe program, such as a sporting
event, to runover the scheduled stop time.
See page 19 to:
• cancel a Umer recording in progress.
• replace program contents.
• review or clear program contents'once set.
Important notes when using a DSS receiver
• WhenTecordingprogramsvia a DSS receiver,
the DSSreceivermustbe left on.
• Whenrecordingprogramsvia an antennaor
cable,the DSS receivermustbe tumed off.
3 Press the NUMBERED keys to
enter the PlusCode number.
• RefertoyourlocalTV listings.
To Make Corrections
Press • repeatedly to delete the
PlusCode number. Then, enter the correct number.
VCR Plus+
ENTER PLUSCOOE NUMBER
123458
USING 0-9 KEYS
BACKSPACE: 4 KEY
ENTER :PROG KEY
4 Press PROG to lock in your program.
5 Press the 1, 2 or 3 key to select
the program type.
6 Press J,V and • to select and
set each of the remaining items
as follows.
Remaining Items
• Category (N/A [not applicable], SPORTS,
MOVIE, COMEDY, MUSIC, DRAMA)
• Speed (SP, LP, SLP)
To Make Corrections
Repeatedlypress• to movethecursor
DELETE to the right,or • to movetothe leftto the
incorrectenky and makethe correction.
7 Press PROG ifcontents are
acceptable.
To cancel program contents:
PressADD/DELETE.
VCR Plus+ I
1 ONE TIME J
2 DAI LY (MON-ERI) I
3 WEEKLY" i
TO SELECT PUSH 1.2 OR 3
DATE START STOP /:1:11
SELECT:& • KEY I [
SET :.q• KEY I I
END :PROG KEY .IJ
/
Ifyou useconnectiontype
"A"on page 28, the
channelshownin thison-
screen displaywillalways
be the cable boxoutput
channel number.
PDTST_T STOPa_sPol
CANCEL: ADD/DLT KEY |
SELECT 1-8:& • KEY |
ENTER :1,. KEY J
END :PRO(; KEY J
8 mePreSSprogram.PROGto complete 1/1FOR_"_v_C"c°Fo_,ND_o[
,. , ...... /LEAVE CABLE BOX POWER ON
• ITyOUre using a uaole uox, make sure /
that it istuned to the desired channel I
and the power is left on for timer recording.I
€
• Thisdisplaymaydifferdepending
onyourcableboxhook-up.
9 Press POWER off to set the timer.
Multi Function Display
31
To Next Page
Loading...
Need help?
General