VCR Plus+ Setup (continued)
*Important: If the remote control POWER, ACTION, PROG, CHAdY, INDEX or ADD/DLT button does not
work when pressed, press the VCR button on the remote and try the button again.
In orderfor theVCR to readtheVCR Plus+code,someset up isrequired.A Guide(VCR Plus+)channelnumber
isassignedto each localbroadcastandcablestation.Becausethisnumbersometimesdiffersfrom the channel
yourTV receivesthe stationon, it isnecessaryto programthe VCRwithlocalchannelinformation.
5
DELETE
VCR Plus+ Channel Setup
complete this page only if Type B
connection method (pg.28) is used.
• Before you begin, complete the Channel Setup
Preparations below left.
Important Note:
If your VCR connection type changes from type A to B,
repeat steps 1-4 of page 29 and select VCR • CABLE/
DSS BOX • TV or VCR • TV before proceeding with
these steps.
4
! Press ACTION*to display
the menu.
2 Press A_' to select "SET UP
CHANNEL," and then press
• to display the "SET UP CHANNEL" screen.
......... MENU ......... I
I
SET UP VCR |
IO 10MAJLANGUE: ENGLI SH|
SELECT:*. • KEY I
Channel Setup Preparations
NOTE: Complete the steps on this page if your
cable box can be controlled with the VCR, or
your VCR hook-up resembles "B" on page 28.
Prepare a list like the example below.
Thislistwillhelpyousmoothlyentertheinformation
neededinstep=4"at right.
You will needthe following to complete the list:
• A lineupof normaland/orcable stationsyou
receivealongwiththe channelnumbersyourTV
receivesthemon.Acable channelline-upchart
issuppliedbyyourcable company.
• A listof Guide(VCR Plus+)channelnumbers
assignedtothestationsyou receive.This listis
availablein TV Guideandthe TV listingsfound
inselectednewspapers.
1 Make a chartwith3 columnslikethe example
below.Intheleftcolumn,fillinthe nameor call
lettersof thestationsyoureceive.
2 Inthe middlecolumn,fill ineach station's
assignedGuide(VCR Plus+)numberfound in
TV Guide,newspapers,etc.
3 Inthe rightcolumn,fillinthe channelnumber
thatyourTV receivesthe .stationonfrom y_ur
channelline-up.
EXAMPLE ONLY
Broadcast or
Cable
Station Name
HBO
N_6"kelodeon
CBS
_-FOX
3O
Assigned
Guide
(VCR Plus+)
channel no.
33
38
04
11
Channel
no. your TV
receives the
station on
15
20
04
3 Press AV to select "VCR
Plus+ CH SET UP," and then
press • to display the "VCR
Plus+ CH SET UP" screen.
sETusc.,.,, ....1
c,=E I
CHANNEL CAPTION I
ELECT:& • KEY I
SET :=. KEY l
END :ACTION KEY J
IMPORTANT NOTE:
For step "4," use the list you prepared. You may leave
lines blank if you don't receive that station, or if the
GUIDE CH number and the CABLE (or TV) CH numbers
are the sam_
VCR Plus+ CH SET UP
4 Press • to move the shaded
area to the right side.
Then, press AV to change
CABLEorTV CH number.
Next, press _ to setthe number.
Now, press AV to continue.
Repeatthisoperationuntilthelist
iscomplete.
GUIDE CH CABLE CH
ibm --
02 --
SELECT:& • KEY
SET :_ KEY
END :ACTION KEY
I VCR Plus+ CH SET UP
GUIDE CH CABLE CH
• 01 []
02 --
' SELECT:A • KEY
SET, : KEY
END :ACTION KEY
To Enter More Programs
Press AV' and • to select the incorrect CABLE or TV CH
number. Then, press AV to change, or ADD/DLT to delete
the channel.
Press ACTION three times to exit
the VCR Plus+ CH SET UP mode.
To Next Page
Loading...
Need help?
General