Panasonic Omnivision PV-M1346

»
MM check list before you begin
[_] All connections are made.
(See page 5.)
C] Your Combination VCR is plugged in.
Z^
© E) TRACKING/
x V-LOCK
UP/DOWN
Caution:
Please inspect your cassette tape for
any loose or peeling labels as it may
become jammed in your unit.
Playback a Tape
o Inserta cassette.
* Combination VCR power comes on
automatically.
* Playback begins if cassette has no
record tab.
(2) ns . Push PLAY to start playback.
(Unit or Remote Control)
» SP mode tapes have a search speed of
| S „т. 9 times and SLP mode tapes 27 times
(Unit or Remote Control) the normal speed.
MOS
"me
Push
REW
or
FF
to
quickly
dD
or
locate
a
scene.
• Some noise bars will appear during search.
=6— Push STOP to stop playback.
(Unit or Remote Control)
rear Push STOP/EJECT to eject the cassette.
* This button only on Combination VCR.
t- eerie + ao yi m cm
Special Effects During Playback
These features work best in SP or SLP mode. The sound will be muted.
(After the Combination VCR is in the Still or Slow mode for 3 minutes, it will
go into the Stop mode automatically to protect the tape and video head.)
Slow Motion Playback
Push SLOW to start and then, push SLOW A /W to vary the tape speed.
To release the Slow mode, push PLAY or SLOW.
Still (Freeze) Frame Picture
Push PAUSE to freeze and release the picture.
Frame by Frame Advance
While in Still mode, push repeatedly or hold down the SLOW button to
advance the still picture one frame at a time. Push PAUSE or PLAY to
release.
Feature for a Quality picture
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control
Use during Playback and Slow Motion mode to reduce picture noise.
Push the CH (TRACKING) A/¥ buttons until the picture clears up.
To return to Auto Tracking, eject and re-insert the tape.
V-Lock Control
in
Still
mode
the
CH
(TRACKING)
A/V
buttons
operate
as
a
V-Lock
control
to
reduce
jitter.
Push
A/V
until
the
picture
is
stabilized.
13
gJ
0)
2
o
<
©
л
О
po!
(D
=
>
zi
=