Panasonic Omnivision PV-M1346

One Time Setup
[МЇ check list before you begin.
Your Combination VCR is connected to an
Antenna, or Cable system (see page 5).
You've read over the Select/Set Wheel
operation, below.
Using the Select/Set Wheel
There are basically two types of Wheel operation.
• Selecting items from an on-screen dispiay.
* Entering information, such as setting the clock.
OPERATION
Rotate Push
(up or down) (like a button)
ROTATE TO SELECT ROTATE TO SELECT
Pan TO PUSH TO
SET SET
to make selection to enter selection
6
To Set Language, Channel and Clock
When the Combination VCR power is first turned on, the channel auto set and
set clock screens appear automatically.
Turn the Combination
D O VCR on.
(2)
(2):
for
оп-ѕсгееп
displays
SELECT
LANGUAGE
zi
in
English
or
Spanish.
|
push
cup
:engiisn
or
PULSE CH DOWN: Espanoi
_ * |f you choose the wrong
cH & language, please see the “Reset
gj all Combination VCR Memory
ғ Functions" section on page 20.
* If you use a cable box, the cable box must be left on for
auto channel set.
Important: If you use a cable box, |
E)
turn
it
оп
and
select
PBS
|
CHANNEL/CLOCK
AUTO
SET
лл
;
CONNECT
ANTENNA
CABLE
station
in
your
time
zone.
|
соммест
oy
use
A
CABLE
(2): Push CH UP to start вох поче CH THEN...
? Channel Auto Set and
Clock Auto Set.
PLEASE PUSH CH UP KEY
CH 3
These on-screen displays will appear in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
pec
12/25/1996 ED 12:00PM
SETTING : CH 10
AUTO CLOCK SET
IS INCOMPLETE
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
Confirm that displayed time is correct and
| push the CH UP button to exit.
If the displayed time and D.S.T. are incorrect,
please proceed as follows:
In the rare event that you live close to two different time zones,
the Combination VCR may recognize the wrong PBS station
as the setting channel. In this case, please do the following:
PUSH MENU TO SET CLOCK
I Make a note of the SETTING:CH number shown on-screen
and push the CH UP button to exit.
2 Delete the setting channel from the Combination VCR channel
memory. (See the Add or Delete a Channel section on the next
page.)
3 Push the MENU button to display the menu.
4 Use the WHEEL to select "CLOCK" and then to select "AUTO
SET."
* |f you use a cable box and have multiple PBS stations, tune
the cable'box to a different PBS station and try auto clock
set again using the menu.
If the screen above appears, auto clock set 15
not available in your area. Please set the clock
manually as described on the next page.
* To view the deleted channel, please select with the NUMBERED keys.
* [f for any reason, the time is changed manually, automatic time
correction will not occur. |
„ Auto clock set wili be performed when the Combination VCR is
NO
turned
off
the
first
time
each
day.
If
you
use
a
cable
box
and
you
«7 want auto clock set to be performed, the cable box must be left
on
and
the
PBS
channel
is
tuned
at
the
Combination
VCR
power
is turned off.