Panasonic Omnivision PV-M2738 - Page 20

e es
Check list before you begin.
Q All connections are made {see page 5).
Q Your Combination VCR is plugged in.
STOP/EJECT
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature maybe used to keep young
children from operating the Combination VCR.
Hold down STOP/EJECT on the
Combination VCR for 7 seconds
during Stop or Power OFF mode.
To Cancel the VCR Lock feature,
Hold down STOP/EJECT on the
Combination VCR for 7 seconds again
during Stop or Power OFF mode.
• VCR Lock mode is cancelled automatically after
24 hours as long as the clock is set.
• This feature cannot be activated or cancelled
when a timer or one touch recording is in
progress.
NOTE:The on screen message will only be
displayed on your TV screen if the VCR
Lock feature is activated in the Power on
mode.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
1 Press MENU to display the MAIN
MENU.
2 Press to select “VCR,”
and then press MENU to display
the SET UP VCR screen.
3 Press AT to select
“BEEPER,” and then press
► to select “ON” or “OFF.”
4 Press MENU twice to exit this screen.
20