7
Getting Started
Self Demo Mode
EVF or LCD Monitor
Note:
• Self Demo stops automatically if battery
is attached (page 9) and cassette tape is
inserted (page 11).
• Inserting a tape alone (or attaching a
partially charged battery) only temporarily
stops Self Demo.
• Self Demo stops for 30 seconds when the
Back Light is pressed.
To turn Self Demo back on:
• Set to SELF DEMO : ON in MENU screen.
Before you begin...
• Connect Camcorder to power source.
Self Demo mode is on when the screen
below appears. To turn it off, follow
steps 1-4 below.
1 Set POWER to CAMERA.
2 Press MENU for
MENU mode.
Press UP or
DOWN to select
SELF DEMO .
3 Press M.FOCUS to select OFF.
4 Press MENU to exit.
1
2, 3, 4
01.L453 Getting p01-08(w/o P) 02.11.28, 2:45 PM7
To Next Page
Loading...
