Panasonic Palmcorder Palmsight PV-L858 - MENU Mode

| MENU Mode
MENU Mode Setting
MENU Mode Screen
---
MENU
---
PAGE
1/2
TALLY LAMP ; ON
STAND-BY RELEASE ; OFF
CLOCK SET
SELECT: PUSH W/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
--- MENU --- PAGE 2/2
A
TIME LAPSE ; OFF
SELECT: PUSH V/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
Before you begin...
* Connect the Camcorder to a power source.
* Set the POWER switch to CAMERA.
1 Press the MENU button to display
the MENU mode.
hd
SELECT: PUSH W/a KEY
SET : PUSH DISPLAY
END : PUSH MENU KEY
Press UP A or DOWN Y repeatedly
to select a menu ttem.
3 Press the DISPLAY button to set your
selection.
74 ERRE the MENU button to exit the
Menu mode.
Note:
* The Camcorder will exit the Menu mode if,
after activation, none of the UP/DOWN(a/¥),
DISPLAY, or MENU buttons are pressed
within 5 minutes.
(O) PROGRAMMED REC (see page 27).
You can program the Camcorder to
start and stop recording at a preset
time.
(2) TITLE (see pages 47-49).
AUTO/MANUAL : 16 items
PHRASE : 10 items
@ TALLY LAMP (see page 46).
The Tally Lamp comes on during
recording when set to ON.
@ STAND-BY RELEASE (see page 25).
To resume recording from Stand-by
mode, when set to ON.
© CLOCK SET (see pages 14-16).
To set the clock, select CLOCK SET.
© TIME LAPSE (see page 45).
To set the TIME LAPSE, when
set to ON.
payers Humay
13