Panasonic Palmcorder Palmsight PV-L858 - Setting the Clock

Setting the Clock
Setting the clock is divided into four sections: Time Zone, Daylight Saving Time, Date
and Time, and Clock Battery. Follow instructions in the order presented.
Before you begin...
« Connect the Camcorder to a power source.
Setting the Time Zone
The Camcorder is set to Eastern time e Set the POWER switch to CAMERA.
zone at the factory. If you live, or are Note:
traveling, in a different time zone, follow + When the POWER switch is set to VCR, the
the steps to select the appropriate time CLOCK SET menu will be displayed.
zone from the menu screen. e The Camcorder's clock may lose or gain up
to two minutes per month. Please adjust as
necessary (refer to page 16).
I Press the MENU button to display
the MENU mode. Press UP A or
DOWN YV aaa to select
7 MENU ---
REC
CLOCK SET
Y
SELECT: PUSH F/à KEY
SET : PUSH DISPLAY KEY
END =; PUSH MENU KEY
2 Press the DISPLAY button to display
the CLOCK SET menu. Press UP A or
DOWN Y dd to select
+++ CLOCK SET ---
; EASTERN
D. S.T, ; AUTO
DATE/TIME ; 12-00: 00AM
JAN 1 1998
SELECT: PUSH V/A KEY
SET: PUSH DISPLAY KEY
END : PUSH MENU KEY
Press the DISPLAY button to display
the SELECT TIME ZONE menu. Press
UP 4 or DOWN Y repeatedly to
select desired time zone.
SELECT: PUSH F/A KEY
SET : PUSH DISPLAY KEY
A press the DISPLAY button to fix the
Time Zone. The CLOCK SET menu
TA TET appears. Press the MENU button to
Note: display the MENU.
When you travel outside the eight time zone To exit from the MENU mode, press
chart above, please set the clock manually the MENU button.
(see page 16).
14