Panasonic Panaboard UB-5315

Other manuals for Panasonic Panaboard UB-5315

Specification Sheet4 pages

Questions and Answers

J
Joseph WalkerAug 14, 2025
Why computer does not recognize Panasonic Panaboard UB-5315?
- M
  Michelle RamirezAug 14, 2025
  If your computer isn't recognizing the Panasonic Interactive whiteboard, make sure that the electronic board is in the condition that enables operation or that the USB cable is connected properly. Also, ensure that the electronic board is not connected via a USB hub.
L
Luke ShermanAug 17, 2025
What to do if copied copy paper won't come out of Panasonic Panaboard UB-5315 Interactive whiteboard?
- B
  barrerabettyAug 17, 2025
  If copied paper doesn't come out of your Panasonic Interactive whiteboard, here's what you can check: * Make sure the unit has copy paper or thermal transfer film. The error indicator will flash if it's out. * Ensure the printer door is firmly closed until you hear a click. * Check for jammed paper inside the printer and remove it. * Clean the platen roller and pick-up roller by wiping them.
Y
yhensonAug 21, 2025
Why is nothing printed on the paper or copies are faint on my Panasonic Panaboard UB-5315?
- M
  Marc HernandezAug 21, 2025
  If nothing is being printed, or copies are faint or blurred on your Panasonic Interactive whiteboard, it could be due to the following reasons: * The writing on the screen might be too thin or light. Try making thicker, darker lines or using a new marker. * The printer door might be slightly open. Ensure that the printer door is firmly closed until you hear a click.
H
hubermarissaAug 25, 2025
How to fix black streaks or blank spots on Panasonic Interactive whiteboard copies?
- G
  Gabriel DickersonAug 25, 2025
  If you're seeing black streaks or blank spots on copies from your Panasonic Interactive whiteboard, the issue might be: * A dirty printer head or platen roller. Open the printer door and clean any dirt off these parts. * A wrinkled thermal transfer film. Rewind the used portion to remove excess slack before reattaching it.
A
Annette WalkerAug 27, 2025
What to do if the Panasonic Panaboard UB-5315 Interactive whiteboard power switch is on but the indicator is off?
- M
  Michael MayAug 27, 2025
  If the power switch is on but the indicator light is off on your Panasonic Interactive whiteboard, check that the power plug is securely plugged in. If the indicator still doesn't light, turn the power off and on again.
K
Kimberly HerreraAug 31, 2025
Why does a black or white line appear on Panasonic Panaboard UB-5315 prints?
- J
  Joseph JonesAug 31, 2025
  If a black or white horizontal line appears, or the page prints in black or blank on your Panasonic Interactive whiteboard, it might be due to strong sunlight or lighting. Try changing the direction of the screen or blocking the light.
J
Jack MillerSep 3, 2025
What to do if Panasonic Panaboard UB-5315 USB or printer driver doesn't work after installation?
- B
  bowenericSep 3, 2025
  If the USB or printer driver for your Panasonic Interactive whiteboard isn't working after installation, run “UB-5xxx\Uninstall\UB5Uninst.exe” from the CD-ROM to uninstall the drivers. Then, reinstall the drivers.
T
Terry MartinezSep 7, 2025
Why is the Contrast/Remaining Film Indicator flashing on my Panasonic Interactive whiteboard?
- D
  Dr. Elizabeth Dean MDSep 7, 2025
  If the Contrast/Remaining Film Indicator is flashing on your Panasonic Interactive whiteboard, it means the thermal transfer film is running low. Prepare a new replacement film (UG-6001).
R
romanwilliamSep 10, 2025
What to do if screen does not advance when pressing Copy/Advance Key on Panasonic Panaboard UB-5315 Interactive whiteboard?
- J
  Joseph MeadowsSep 10, 2025
  If the screen doesn't advance when you press the Copy or Advance Key on your Panasonic Interactive whiteboard, it could be due to static electricity generated when the screen film was wiped. Turn off the power and slowly move the screen by hand.