C
Corey RussellSep 23, 2025
How to fix Panasonic Fax Machine that does not stamp?
- JjohnmorganSep 23, 2025
To fix a Panasonic Fax Machine that does not stamp, check Fax Parameter No. 4 and No. 28 settings.
To Next PageTo Next PageHow to fix Panasonic Fax Machine that does not stamp?
To fix a Panasonic Fax Machine that does not stamp, check Fax Parameter No. 4 and No. 28 settings.
What to do if the document is too long or jammed in Panasonic All in One Printer?
If your document is too long or jammed in the Panasonic All in One Printer, ensure the document length does not exceed 39.4 inches (1 meter). Note that at 600 dpi, the maximum length is 24 inches (600 mm), subject to available memory. Reload the document properly and remove any jams.
What to do if Panasonic All in One Printer shows communication error during initial connection?
If you experience a communication error or the receiving station doesn't respond during the initial connection with your Panasonic All in One Printer, check with the other party and reload the document and send again.
How to fix transmission password mismatch on Panasonic Panafax UF-7000 All in One Printer?
If the transmission password does not match on your Panasonic All in One Printer, check the password or the telephone number in One-Touch or Abbreviated station, especially if you're using Selective Reception mode and suspect an unauthorized station.
What to do if no confirmation from receiving station on Panasonic All in One Printer?
If you receive no confirmation from the receiving station for the previous page sent on your Panasonic All in One Printer, wait a few minutes and then try sending the document again.
What to do if Panasonic Fax Machine has no machine operation?
If your Panasonic Fax Machine has no operation, reset the machine by turning the Power Switch "Off" for a few seconds, then turn it "On" again.
How to fix document feed issues on a Panasonic Fax Machine?
To resolve document feeding issues like documents not feeding or multiple feeding in your Panasonic Fax Machine: - Ensure your document is free of staples, paper clips, grease, and tears. - Verify that your document is the correct type for sending through an ADF. - Confirm that the document is loaded properly.
What to do if recording paper doesn't eject from Panasonic Fax Machine?
If the recording paper doesn't eject after printing on your Panasonic Fax Machine, check to see if the recording paper is jammed inside the machine.
Why Panasonic Panafax UF-7000 All in One Printer receives no command in receiving mode?
If the Panasonic All in One Printer goes into receiving mode but receives no command from the transmitting side, it might be due to the remote side misdialing. Check with the other party.
How to resolve polling transmission error on Panasonic All in One Printer?
If you encounter a polling transmission error on your Panasonic All in One Printer, check the polling password to ensure it is correct.
General| Functions | Print, Copy, Fax, Scan |
|---|---|
| Printing Technology | Laser |
| Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Max. Copies | 99 |
| Fax Transmission Speed | 33.6 Kbps |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Automatic Document Feeder Capacity | 50 sheets |
| Grayscale Levels | 256 |
| Paper Sizes | A4 |
| Connectivity | USB |
| Media Type | Envelopes, Labels, Plain Paper, Transparencies |
| PC Connectivity | USB |
| Type | All in One Printer |
Overview of the machine's capabilities for Internet Fax, Email, and Network Scanning.
Explanation of symbols and icons used throughout the operating instructions.
Step-by-step guides for performing key operations like sending documents and scanning.
Instructions on how to select and configure various machine modes and functions.
Detailed explanation of the buttons and keys on the machine's control panel.
Instructions for physically connecting the machine to the network.
Essential information and features to understand before network setup.
Configuration steps for setting up SMTP Mail Server and POP3 Client.
Explanation of transmission and reception processes for Internet Fax and Email.
Key notes, differences between Internet Fax and Regular Fax.
Configuration details for network and internet parameters.
Procedures for manually addressing and sending documents via email.
Advanced features like DHCP, SMTP Authentication, and LDAP.
Configuration for routing incoming faxes and emails based on sub-address or TSI.
Setting up automatic forwarding of incoming faxes or emails.
Sending documents to multiple fax machines via a relay station over the Internet.
Setting up the address book, one-touch keys, and abbreviated dialing numbers.
Detailed list and explanation of the machine's adjustable fax parameters.
Using email commands to remotely program or retrieve machine settings.
Procedures for editing and managing Internet Parameters and Auto Dialer files.
Instructions for scanning documents to a PC via LAN or direct connection.
Managing PC IP addresses and station information for scanning.
Configuration options for scanning resolution, file type, and compression.
Temporarily changing scan file name or compression format.
Setting up a direct connection between the machine and a PC using a crossover cable.
Common problems and their possible causes and actions.
List of information codes displayed on the machine and their meanings.
Descriptions of error messages sent to the sender during remote programming.
Technical specifications for Internet Fax and Network Scanner functions.
Definitions of technical terms used in the manual.
Alphabetical index to help locate specific topics within the manual.
