16
Getting To Know Your Machine
Connecting the Cable
(10BASE-T/100BASE-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
10BASE-T/100BASE-TX Ethernet Hub
LINK Lamp
Illuminates when connected
to the LAN.
Lamp will not turn ON if LAN
cable is defective (contains
breaks).
LAN Connection Jack
(10BASE-T/100BASE-TX)
LAN Cable
ACTIVITY Lamp
Blinks when there is data
traffic on the LAN.
Ethernet LAN
(10BASE-T/100BASE-TX
Cable Not included)
Power Switch
After connecting all cables and
Power Cord, turn the Power Switch
on the Back of the machine
to the ON ( I ) position.
To Next Page
Loading...
