Panasonic Panafax UF-7000 - Page 91

91
Copy Features
NOTE
2. The default original size is "LETTER". If you use the Multi-Size Feeding function, change the
default original size to "MIX" in the Copier Settings for Key Operator, Parameter No. 13
(ORIGINAL SIZE). (See page 117)
3 54
After the copying
is completed,
press
to go back to
Fax mode.
STOP
6
6
3 54
7 8
NOTE: If the page count for the Back side does not
match the page count for the Front side (i.e. page
double-fed) of the 2-Sided originals, a "SIDE 1&2 PAGE
COUNTS DO NOT MATCH!" and "RESCAN
ORIGINALS START WITH 1ST SIDE" will be displayed
and all scanned data will be cancelled. If this occurs,
restart from Step 1 and Steps 5-d to Step 7.
9
PRESS START TO
CONTINUE
SET ORIGINALS ON ADF
(For 2  1 Copy only)
After the copying
is completed,
press
to go back to
Fax mode.
STOP