87
Setting
Your Machine
142 RELAY XMT
(A.K.A. LAN RELAY
STATION ON UF-770i)
1 Invalid Selecting whether the machine accepts and performs
G3 relayed transmission. (Relay Station Functions)
*2 Valid
143 RELAY XMT REPORT 1 Off Setting how the COMM. Journal for relayed
transmission is sent to the originator.
Off : Don’t send.
Always : Always send.
Inc. Only : Send only if communication has failed.
*2 Always
3Inc. Only
144 EMAIL CHARACTER SET 1 Japanese Selecting the Character Set when receiving or sending
email text.
*2 English
145 SENDER SELECTION *1 Invalid Selecting a pre-programmed sender’s name and email
address before each transmission.
2 Valid
146 POP TIMER ---- 0 to 60 min. Setting the time interval for the machine to check for
email on the POP Server.
(0 = Does not check the POP Server for email.)
*3
147 AUTO POP RCV 1 Invalid Selecting whether the machine automatically downloads
an email from the POP Server.
*2 Valid
148 DELETE POP RCV
EMAIL
1 Invalid Selecting whether the email will be deleted
automatically after retrieval from the POP Server.
*2 Valid
149 DELETE POP ERROR
EMAIL
*1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
150 IFAX RETURN RECEIPT 1 Invalid Selecting whether to send a return receipt when
receiving from another Panasonic Internet Fax.
*2 Valid
151 EMAIL HEADER
FORMAT
1 All Selecting the header information to print when an email
is received. (Normally used for Troubleshooting. It
shows the path of the email transmission before arriving
at your machine.)
*2 Subject/
From/To
3Off
152 SUB-ADDRESS
ROUTING
*1 Invalid Selecting whether to automatically route a received
email using ITU-T sub-address.
2 Valid
153 TSI ROUTING *1 Invalid Selecting whether to route a received fax to an email
address preprogrammed in Auto Dialer using the
originating fax’s Numeric ID (TSI frame information).
2 Valid
154 ROUTING HEADER
FORMAT
*1 Originator Selecting the type of email header to be included in the
"From" field of each routed faxes.
Originator : The originating fax machine’s TSI will
appear in the "From" field of the routed
email.
Relay Station : The routing station’s email address will
appear in the "From" field of the routed
email.
2 Relay Station
155 PRINT ROUTED
DOCUMENT
*1 Inc. Only Selecting whether a received fax to be routed is always
printed or only when the routing operation fails.
2Always
156 PRINT FORWARDED
DOCUMENT
*1 Inc. Only Selecting whether a memory received fax or email to be
forwarded is always printed or only when forwarding is
incomplete.
2Always
157 TRANSACTION
JOURNAL
*1 Invalid Selecting whether the machine sends a transaction
journal to the pre-programmed email address.
2 Valid
158 PC REMOTE UPDATE *1 Invalid Selecting whether the machine will accept commands
from an email application, to:
(a) Program the Internet Parameters
(b) Program the Auto Dialer
(c) Allow retrieval of the Journal
2 Valid
159 SUBJECT LINE ENTRY *1 Invalid Selecting whether the "Subject" line can be
programmed during each transmission.
2 Valid
160 DEFAULT DOMAIN 1 Invalid Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number Dialing.
*2 Valid
No. Parameter Setting
Number
Setting Comments
Continued on the next page...
To Next Page
Loading...
