(7) Unscrew the 5 screws and remove the G-P.C.Board.
Note:
·
The G-P.C.Board is connected onto the A-P.C.Board
with the connector. Work carefully when removing it.
12.7. Removal of J-P.C.Board
(1) Remove the A-P.C.Board according to the section 12.3.
"Removal of A-P.C.Board".
(2) Unscrew the 4 screws and remove the J-metal fittings.
(3) Unscrew the 2 screws and remove the J-P.C.Board.
12.8. Removal of J2-/J3-P.C.Board
·
The procedure is described as an example of J2-P.C.Board.
31
PT-D10000U / PT-D10000E / PT-DW10000U / PT-DW10000E
To Next Page
Loading...
