12.26. Removal of Analysis Mirror
Note:
·
Before attempting the removing, shift the lens to the foremost position.
(1) Remove the DMD block and liquid cooling unit according to the
section 12.25. "Removal of DMD Block and Liquid Cooling Unit".
(2) Unscrew the 4 screws and remove the analysis mirror with
engine base.
(3) Unscrew the 3 screws and remove the engine base.
12.27. Removal of Lens Mount Unit
Note:
·
Before attempting the removing, shift the lens to the foremost position.
(1) Remove the projection lens, DMD block, liquid cooling unit and
analysis mirror according to the section 12.26. "Removal of
Analysis Mirror".
(2) Remove the color prism block and analysis block according to the
steps 2 through 9 in the section 12.23. "Removal of Analysis
Block".
(3) Unscrew the 4 screws and remove the lens mount unit.
48
PT-D10000U / PT-D10000E / PT-DW10000U / PT-DW10000E
To Next Page
Loading...
